High-efficient Sand Making Machine Breaks through Tradition

Nowadays, the sand making machine researched and developed by our company has achieved several dynamic breakthroughs. The processing ability is higher than the traditional sand making machine and reaches more than 6oo tons every hour. Compared with traditional equipment with the same power, the output is improved by over 30% and the performance is more stable. The most suitable angle design of crushing chamber and the materials greatly reduces the machine wear and tear; the granularity of the products is excellent, the granular composition is reasonable so that this equipment is especially suitable for artificial sand production and stone material reshaping.

Henan Daswell Machinery is a professional manufacturer of mining machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:grinding mill,If you are interested in our products, please contact us freely: sales@daswell.com

Dust control: The sand making machine of our company adopts special air self cyclic system, which significantly reduces the out air quantity, decrease the dust amount and benefits the environment. At the same time, the machine obligates and is suitable for installing many kinds of auxiliary dust removing equipment.

In the daily operation and production process of the sand making equipment, the following points should be paid attention to in order to save a lot of maintenance cost for the customers:

(1) Regularly open the observing door to watch the wear and tear condition inside the crushing machine. If the machine has been wore down, the personnel should timely change or repair it. It is strictly prohibited to open the door to watch the inside working condition during the operational process of the machine in order to avoid danger. If the impeller wears down, the customer should timely repair or change it.

(2) Since the machine is working under high speed condition, safe production should always come first during the operation process of the sand making machine. The related personnel should stay away from the equipment, and if it is necessary to repair on the machine, it should be done after the machine is stopped.

(3) Periodically inspect the lubrication system and change the bearing of the machine without delay.

(4) The tensioning force of the driving bead apex should be adjusted to be appropriate in order to make sure the loaded force on the bead apex is even. The current flow difference value of the two motors should not exceed 15A.