Concrete Mixer Wear Parts Directly Affect Work Efficiency

<p>The reason why there are wear parts in crushing chamber is scaleboard wear such as material hardness, abrasiveness <a href="http://www.daswellchina.com/products/concrete-mixers/small-concrete-mixer.html">small concrete mixer</a>, granularity, moisture, inventory, feeding pattern and operating condition. Although these factors are the same, the crushing chamber is different and then the scaleboard wear condition is also different. Now I analysis this problem:</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:<a href="http://www.daswellchina.com/products/concrete-mixers/twin-shaft-concrete-mixer.html">Twin shaft concrete mixer</a>,<a href="http://www.daswellchina.com/products/concrete-batchingplants/small-concrete-batching-plant.html">concrete batching plant</a>s,concrete mixer,blocking making machine,concrete pump,etc. <p> <p>During operation, the amount of to-be-crushed material is the largest in the entrance of parallel and then will rapidly reduce. Therefore, parallel will change after several days of strong wear and crushing.</p> <p>With the degree of scaleboard wear and outline changes of crushing chamber, the material distribution is relatively evenly when the material is crushed along with crushing chamber. In the limited range of scaleboard wear, the changes of outline of crushing chamber especially the whole crushing chamber will lose its original outline when the parallel not exists in the later period. The appearance of parallel will lead to bad product quality; the production of crusher is also reducing.</p> <p>To sum up, due to the scaleboard wear is not evenly, the loss of original shape of crushing chamber may lead to the short service life and reduction of technological and economic indicators. Therefore, this kind of crushing chamber should be improved.</p>