Methods to Prevent Impurities from Entering Hydraulic System

<p>When implementing maintenance to the hydraulic system, people need to disassemble the lid, the filter cover, the inspection hole and the hydraulic pipes. The oil pipes should avoid being exposed to dust. In addition, the dismantled parts must be cleaned before being opened. When it comes to the cleaning cloth and iron hammer, much detailed information needs to be kept in mind. The cloth should be of non-fiber material and the hammer should be equipped with rubber to avoid abrasion. All the hydraulic components and pipes need careful cleaning and they need to be assembled after being dried with high-pressure blast.</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:<a href="http://www.daswellmixer.com/product/Block_Making_Machine/20130929/34.html">mobile block making machine</a>,<a href="http://www.daswellchina.com">concrete batching plant</a>s,concrete mixer,blocking making machine,concrete pump,etc. <p> <p>Authentic filter should be chosen for the components. When changing oil, it would be better to clean the filter at the same time. Before installing filter, professional cleaning material should be used to clean the impurities at the bottom. It should be noticed that: the cleaning oil should be matched with the hydraulic system with temperature between 45-80℃. Large amount of oil can take away part of impurities in the system. The hydraulic system should be cleaned more than three times. After cleaning <a href="http://www.daswellchina.com/products/concrete-mixers/mobile-concrete-mixer.html">mobile concrete mixer</a>, the oil needs to be released from the system while the temperature is high. Then the filter needs to be cleaned, after which the oil can be refilled.</p>