Mechanical Feeder Lifting in the Warehouse Unloading Ore

Mechanical feeder not only can be set up on the ground but also lifting in the warehouse unloading ore at the mouth. Backplane make reciprocating motion, the stroke time is 20-60 times/min, stroke is 20-200 mm. Stroke may be appropriately adjusted by the driving device eccentric wheel and the eccentricity is half a stroke. According to some mill practice, the viscous minerals, eccentricity should not be less than 30 mm. chute feeder' align='left' width='320' />

Mechanical feeder is generally hoisted at the discharge opening of the ore storage bin. The bottom plate of chute makes reciprocating motion for feeding, with jig frequency of 20-60 times/min and length of stroke of 20-200mm. The feeding quantity depends on the length of stroke. Method for adjusting length of stroke: it is appropriately adjusted by adjusting the offset of eccentric gear of driving device. Feeder trough width is about 2-2.5 times of the largest feed particle size. The largest feeder trough can meet the particle size of less than 500 mm to the iron ore mine. Scientific management, advanced processing technology and innovative manufacturing theory make Hongxing Machinery become the exporting base of ore vibrating feeder, ore feeding machine and famous grinding equipment in China. Interested in our products? Send us an email into sinohxjq@hxjq.com for more details?

When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals. Mechanical feeder is used to take out lump and granular materials from material warehouse and send them to various receiving devices, but it is not suitable for transporting concentrate fines and other powder materials.

It is applicable to industries of ore dressing, coal, chemical industry, etc. The machine is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler.

vibrating grizzly feeder: http://www.hx-jawcrusher.com/pp/pvibratory-feeder.html