Fresh connection gaming
Would you like to react to this message? Create an account in a few clicks or log in to continue.

The methods of transport concrete if the floor is too high

Go down

The methods of transport concrete if the floor is too high Empty The methods of transport concrete if the floor is too high

Post  hahei Sun Mar 20, 2016 9:24 pm

In fact, regardless of commercial concrete mixing plant or engineering concrete mixing plant, you will meet the question when you irrigate concrete to some special engineering, will encounter this problem. All various concrete finished products produced by commercial concrete mixing plant is always used in different engineering project construction, such as high buildings etc。Today Daswell tell you, how to transport the concrete produced by concrete mixing plant to the roof?

Henan Daswell Machinery is a professional manufacturer of mining machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:small concrete batching plants,concrete batching plant,If you are interested in our products, please contact us freely: sales@daswell.com

First of all, you should put the concrete produced by new concrete batching plant equipment into the pipe with a high pressure pipe of 10cm~20cm diameter, and then send out the concrete in the pipe to the high buildings with the powerful air pressure. This is the common methods of delivering concrete in the world at present. And using this method SICOMA concrete twin shaft mixer, you should pay attention to the following two problems:

we should choose a suitable injection time according to the actual construction situation. As for the desert area SICOMA Twin Shafts Forced Concrete Mixer, you can only work at night concrete block making machine, this can avoid the concrete in high-pressure pipe clot caused by the high temperature during the day; However, as for the low temperature area year-round, such as Russia, it can only work during the daytime, samely, this is also in order to avoid the clot of concrete in pressure pipe caused by low temperature at night; If you want to use different labels to have mixing work, you not only should use different pipelines to spray, but also you should take care that the concrete sprayed to the high building can't be mixed together.

hahei

Posts : 922
Join date : 2014-02-08

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum