Tips of operation of pan type concrete mixer from China

<p>5. If there is any abnormal situation in the above steps, please stop the machine immediately <a href="http://www.dwconstructionmachine.com/en/Products/Block_Making_Machine/30.html">block making machine</a>, overhaul it and remove the failures. Then try again until it can work normally. Check all the liner plates, bolts and nuts and fasten them after a new <a href="http://www.doubleshaftconcretemixer.com/">concrete mixer</a> is putting into use for one day. Lubricate the transmitting lubrication places.</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:concrete mixer,concrete mixer,We will provide you with the best product and service. <p> <p>4. Start the discharging door to unload the materials after the concrete mixer works about 25~35s.</p> <p>3. Shut down the discharging door, add the required mixed material in the hopper and then lift the hopper. The hopper should have a smooth and reliable operation and it should be stopped at any places of the rail. If there is slippage, please lay down the hopper to the bottom of the foundation pit. Next, adjust the big nut of braking motor. If the hopper can be lifted normally, feed in to the mixing barrel after reliable braking and meanwhile start water pump to supply water to the mixing barrel.</p> <p>2. Start mixing motor of concrete mixer.</p> <p>1. Confirm the amount of water supply according to the concrete ratio that is required. Then adjust time condensers to the homogenous water supply time.</p> <p>Sicoma planetary concrete mixer has one or two mixing stars that rotate themselves while also rotating around a central point <a href="http://www.daswellchina.com/products/othermachine/concrete-pump.html">concrete pump</a>, allowing each arm to cover the whole mixer floor in a number of revolutions. The three blade 'egg whisk' mixing action on each head gives complete coverage of the entire floor of the mixing pan. The blades rotate on an everchanging axis, as the gearbox spins the blade carrying spider. This means no segregation of aggregates, with heavier material migrating to the panwall, as is the case with standard rotating pan mixers.</p>