How to Check Rod Grinding Mill in the Round?

<p>After the rod grinding machien installed, we must pass a no-load and load test qualified, are allowed to use formally, use the unit should be based on the specific situation of the factory operation, maintenance, maintenance system, to ensure the normal operation of the grinding machine. But do you know how to check theis mill in the round?</p><p>Simplified and hollow shaft assembly before the cylinder for inspection, the ovality tolerance shall not be greater than 5 mm.(2) the simplified with hollow shaft assembly, burr, flash, etc on the surface of the joint should be clean, and with the joint surface coated with red lead, according to the aim with the location of the drill, fixed bolts, first from round to check the jointing surface in the flange, should contact closely and shall not join any adjustment gaskets, then all fixed screw tight.</p><p>Check the <a href="http://www.fte-china.com/">Fote machiery rod grinding mill</a> main body:1) check the bearing temperature is stable, normal, main bearing alarm temperature for 55 o70 o C, pinion alarm temperatureC. (2) observe whether lubricating oil flow is normal, should not have a cut-out, vomit a bubble phenomenon, check whether the oil is black or saponification, oil in the presence of metal powder. (3) check the lubrication filters import and export of two oil pressure gauge pressure difference value is less than 0.15 Mpa. (4) the main bearing cooling water temperature is normal, water temperature is less than 34 oC, each main bearing of the cooling water of 35-40 litres per minute. 5. Observe the size of the gear meshing operation is normal, gear lubrication are in good condition, with and without vibration and periodic noise, brush with gear cover, touch, check the small gear lubrication oil tank in each shift. 6. Check in the operation of the main bearing in presence of displacement and vibration. 7 per shift to check the feeding of sealing rubber lubricating oil leaks and add lubricating oil in time.</p><p>If you have any other question or have an interest on our product ,you can write to us: info@sinoftm.com. </p><p>shaking table: http://www.fte-china.com/pro/shaking_table.html</p>