Structure and Application of Planetary Concrete Mixer

<p>Then, laminate the secondary concrete to 120 mm with the body weight of crusher, adjust the horizontal and vertical positions of the engine body and use a pillar to fix the body position. After concrete is solidified, it will jack up the body and make the base about 50 mm higher than secondary grouting layer <a href="http://www.dwmixers.com/products/brick-machine/concrete-pump.html">concrete pump</a>, and then insert the prepared rubber pad between the secondary grouting layer and the base body. After placing the rubber pad well, the equipment needs to be put on the rubber pad slowly and evenly. After rightly adjusting the horizontal and vertical positions of the engine body, all the foundation bolts need to be tightened. Stop jaw crusher after it works a whole day to tighten all the foundation bolts again to achieve the reinforcement effect.</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:<a href="http://www.dwmixers.com/products/concrete-mixer/diesel-concrete-mixer.html/">concrete mixer</a> for sale,<a href="http://www.dwmixers.com/products/brick-machine/concrete-block-making-machine.html">mobile <a href="http://www.daswellmixer.com/product/Block_Making_Machine/20130929/34.html">block making machine</a></a>,We will provide you with the best product and service. <p> <p>Prepare a rubber pad whose tensile strength is 8MPa~20MPa, elongation at break is 500%, coefficient of elasticity in shear is 2 MPa and thickness is around 50 mm. According to the usual practice, pour the reinforced concrete foundation and obligate the secondary watering position <a href="http://www.dwmixers.com/products/concrete-mixer/twin-shaft-concrete-mixer.html">twin shaft concrete mixer</a>, the steel fabric whose height is 8mm and diameter is around 8mm (according to load) is set in the location of secondary grouting layer to strengthen its tensile strength and prevent it from rupture. Besides, 150 mm or so concrete is poured on the steel fabric once again, and after this, the bottom of frame needs to be immediately set on the concrete.</p>