An innovator in concrete batching plant

<p>5.After used <a href="http://www.daswellmixer.com/">concrete mixer</a> <a href="http://www.dwdieselmixer.com/pro/p11.html">beton mixer</a>,you should power off it,lock the switch box,so that make sure security.</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:<a href="http://www.daswellchina.com/products/concrete-mixers/diesel-concrete-mixer.html">diesel concrete mixer</a>,Sicoma <a href="http://www.daswellchina.com/products/js-concrete-mixer/js1000-twin-shaft-concrete-mixer.html">twin shaft concrete mixer</a>,We will provide you with the best product and service. <p> <p>4.Check whether transmission clutch and brake are flexible and reliable or not ,whether wire rope damaged or not belt type <a href="http://www.daswellchina.com/">concrete <a href="http://www.dwconstructionmachine.com/">batching plant</a></a>,and whether the track pulley good or not,also check the situation and lubrication wether normally.</p> <p>3.Make sure the drum direction equally of the rotation and arrow.If not,you need change motor wiring.</p> <p>2.Concrete mixer should adopt secondary earth leakage protection.When turn on the power source on working,you should look over it,and then test the mixer when the mixer empty,so the mixer can work normally.You must test the drum rotate speed before test the mixer.Generally,empty drum fast 2-3 circles than the full drum,if the speed has a large gap,you need adjust proportion of the driving wheels and gearing wheels.</p> <p>1.Concrete mixer should be installed in the flat position,then put the wheels onto the square board, so that keep wheels overhead from walking when it works.</p>