Batching Plant is Easy to Operate in Our Daily Lives

<p>4. When the machine needs to be stopped, feeding must be stopped earlier. The machine can only stop when the classification is finished and there are no materials inside it.</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:<a href="http://www.dwdieselmixer.com/product3.html">twin-shaft compulsory mixer</a>,<a href="http://www.daswellchina.com/products/concrete-batchingplants/small-concrete-batching-plant.html">concrete <a href="http://www.daswellchina.com/products/concrete-batchingplants/ready-mixed-concrete-mixing-plant.html">batching plant</a></a>s,<a href="http://www.dwdieselmixer.com/">concrete mixer</a>,blocking making machine,concrete pump,etc. <p> <p>3. When the spirochete is rebooted, it should be down to a certain position before its rolling.</p> <p>2. If special faults happen such as getting stuck or must immediately stop operation by overload when the spirochete is working, workers should lift the spirochete out of the pulp surface at once and open the ore valves avoiding silting up.</p> <p>1. Pulps must be fed after the rolling of helicoid, and then increased gradually.</p> <p>Details of the operation:</p> <p>By the principle that solid grains with different sizes and proportions have different setting velocities ine the liquid <a href="http://www.daswellchina.com/products/concrete-mixing-plant/hzs25-concrete-mixing-plant.html">concrete mixing and batching plant</a>, the fine ore grains overflow out with water and the coarse grains subside to the bottom of the tank then upward discharged by the spiral. Spiral Classifiers can filter the grinded powders of the mill then discharged from the overflow pipe, while the coarse grains will be put into the feeding hole of mill by the flight. The machine base is made of channel steel and the body is welded by steel plate. The water-enter hole and spindle head of the screw shaft are made of pig iron, which is wear-resisting and durable. Lifting device of the Spiral Classifiers can be classified into power-operated one and manual one.</p> <p>working principle:</p>