Need Maintain Concret Mixing Plant Production Line

<p>In addition, when the electromotor is stopped, material feeding work must be stopped firstly. Only if the materials fully fall to the ground, the electromotor can be stopped. As for the routine maintain of roll crusher, we should do as the following points:</p>Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:<a href="http://www.daswellchina.com/products/concrete-mixers/mobile-concrete-mixer.html">mobile concrete mixer</a>,<a href="http://www.dwmixers.com">concrete batching plant</a>s,concrete mixer,blocking making machine,concrete pump,etc. <p> <p>(1)Take notice of the fastening condition of each component, if loose, tightening is timely needed.</p> <p>(2)Check the condition of the discharging port at fixed period. If blocking is found, it should be eliminated.</p> <p>(3) The oil should be added to the bearing without delay to avoid the oil leaking phenomenon.</p> <p>(4) Before working, roll crusher must be started in advance. After the rotating speed is normal <a href="http://www.beton-mixer.com/products/concrete-mixer/sicoma-meo-twin-shaft-concrete-mixer.html">SICOMA twin shaft compulsory concrete mixer</a>, material can be fed into the machine.</p> <p>(5) The temperature of bearing should be controlled because the temperature cannot be higher than the surrounding air.</p> <p>(6) The excessive load of machine should be avoided, so the operator should notice the electric instrument.</p>