How to extend the service time of the concrete mixer

(3) When the wear gap between the concrete mixer stir and the lining board is too large, the two level sides of the cylinder body should be adjusted less than or equal to 5mm.

Henan Daswell Machinery is a professional manufacturer of mining machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:concrete mixer supplier,Ready-mixed concrete batching plants,If you are interested in our products, please contact us freely: sales@daswell.com

(2) Replace the concrete mixer blade applications standard torque wrench when tightening torque should reach 200-220N. M.

(1)Each part of the fastening bolts should always be checked double horizontal shaft concrete mixer, especially the blender base, motor housing mobile concrete mixer, blade and the liner to prevent loosening.

Some users will see some staffs of operating the concrete mixer smear some butter in front of the driving gear of the concrete mixer begins to work every day. And painted in the chain plus a small amount of grease, cleaning the chain every 300 hours of working time per week. In addition, you should also open the transmission chain cover once a week. After the concrete mixer to stop working, the materials in the mixture storage silo should be cleaned. And then cut off the general supply; check the tightening situation of the stirring arm and blade. If found the nut loose, operators should tightened it immediately. These are the daily needs attention. There is a big connection between the service life of concrete mixer and the daily maintenance. So the repair and maintenance of concrete mixer should pay attention to the following points: