Why does Concrete Mixer Appears Problems in Cleaning Process

When you stop machine, the first thing is to make full use of the thrust of agitator shaft blade, remove the remaining materials out, then shut down the machine and clean up follow these steps: close systems according to the order concrete batching plants, open side view of two rubber mixers, and start purge tape machine, so as to ensure all excess materials of internal and sidewall concrete mixer is(are) removed to the maximum extent MP planetary concrete mixer, and then use pole pressure washer gun of mixing machine to wash inter, and make the cleaning water out through the clear material tape machine .

Henan Daswell Machinery is a professional manufacturer of construction machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:MP500 Planetary Concrete Mixer,ready-mixed Concrete Batching Plants,If you are interested in our products, please contact us freely: sales@daswell.com



Because operators did not follow the operation standard, there are difficulties when cleaning the concrete mixer. The first thing is to observe whether deviation operating track of the tape and tightness is reasonable during commissioning process. In the initial work. Firstly, you should take sand materials to the feeder for 10s mobile ready mixed concrete plant, and then take the sand material into the mixer, so you can make rope row machine attached to a layer of sand under stirring action, then stir materials formally, which will facilitate the process of cleaning material operations to the maximum extent.