Tips on How to Maintain Roll Crusher Efficiently

Roll crusher maintenance and safety technology:

1, bearing: crusher bearing shoulder the entire load of the machine, so good lubrication for the bearing life of a great relationship, it directly affects the life and the operation rate of the machine, thus requiring the injection of oil must be clean, seal must well, at the main oiling machine (1) Turn the bearing (2) roller bearing (3) All gear (4) activities bearing, sliding plane.2, the newly installed tires prone to loosening must always be checked.3, note that the various parts of the machine is working properly.4, pay attention to check the degree of wear of wear parts, pay attention to the replacement of worn parts.5, the release of the active device chassis plane should avoid activities out dust and other materials bearing on the bottom shelf is not encountered when moving the machine can not be broken material, resulting in a serious accident.6, bearing temperature rise, the reasons should be eliminated immediately stopped and checked.7, when the turning gear operation should be immediately stopped if the impact of the sound check and eliminate.

Roll crusher should pay attention to what matters at work

1) To strengthen the work to iron ore. Non-broken (solder prime matter) would fall to between rolls crusher damage, resulting in parking accident. So before the crusher unit should be installed in addition to iron.2) viscous material is easy to plug the broken space jam fault handling should stop treatment, can not be stabbed mine in operation.3) When the roll crusher processing of materials containing large chunks of time, pay attention to large pieces of ore from the crushing space easily squeezed out, to prevent injury or damage to equipment.4) After roll crusher run a long time, due to the larger roll surface wear, will cause the product size too small, then pay attention to adjust the port of discharge or equipment maintenance.5) to strengthen the inspection of the roll crusher parts, crusher parts for lubrication time to refuel and maintain good equipment lubrication.

At the present, Fote Heavy Machinery has set up three state level machinery research institutes, and we also produce various kinds of cone crusher manufacturer, tertiary stone crusher and free service for assembling various kinds of production line.
mini mobile crusher: http://www.ft-mac.com/pro/productclass7.html