The Operation and Maintenance of Teeth-roll Crusher

juice Mon Sep 22, 2014 10:08 pm

When we feed the materials into the equipment along with the direction of the roller unevenly, this can cause that the surface of roller is fried quickly and the wearing point is not evenly, it will appear the annular groove and the normal working will be broken, the size of particular is not evenly. So besides using for the coarse teeth-roll crusher, medium, fine crushing equipments is set with the vibrating feeder, this can promise that the feeding is continuous and evenly, and the length of the feeding machine is the Hongxing with the length of roller, the direction of feeding materials is Hongxing with the direction of roller.teeth-roll crusher' align='left' width='320' height='240' />

If we can maintain and operate the teeth-roll crusher in the right way, this can promise that the equipment has the long time and continuous working, reducing the time of parking. We should manage and check out the working condition of teeth-roll crusher, which can avoid the fault and make the equipment continuous work, for this, we should pay attention to the following points:

A. we should pay more attention to the fixed condition of the bolt of all the parts, if we find thy are loose, we must fix them again.

B. before the working, we must start the teeth-roll crusher firstly, when the rotor speed is normal, we can feed the materials into the equipment. For parking time, the processing is opposite.

C we should check out the condition of feeding mouth on time, if we find having the jamming, we must clear them quickly.

D. paying attention to the wearing degree of the wearing part, we should change the parts in time.

E. do not make the machine have the generate load, watch the electrical instrumentation every time.

F. we should add the lubricating oil to the bearing in time and promise the oil will get out to other pacts.

G. we should control the temperature of the bearing, keep it not higher than the ambient air 25-30℃.

H the bottom that used for putting the moving devices, we should clear the dust and the materials to protect teeth-roll crusher form the damage of the not crushing materials. The moving bearing can not move on the bottom so that avoid the badly accident.

jaw crushing machine: http://www.breaker-machine.com/jaw-crusher/