Introduce the Maintenance Tips of Flotation Cells

Flotation machine, which is also called floation separator, is applied for separating nonferrous metal and ferrous metal and nonmetal such as fluorite and talc. Compared with flotation cells, its uniqueness lies in big size, lower power loss and light wear and tear of the impeller. Flotation machine is commonly used ore flotation equipment in the ore dressing plants and plays a crucial role in the fast development of mining industry in China.

The ore flotation equiipment is the first mechanical open type machine to incorporate a vertical circulation of pulp, made possible by combining a “recirculation well” with the distinctive top feed impeller. This arrangement provides positive vertical circulation of pulp similar to the action in a propeller agitator. Pulp from an intermediate zone of the cell is circulated down into the eye of the impeller, mixed with air, and diffused out over the entire bottom of the cell, creating a uniform upward current. This principle varies from most other mechanical open type cells which circulate pulp by lifting it up from the bottom of the cell into the centre of a rotating element.




Flotation cells use and maintenance:

1. the flotation ability to work and work the same period and other machines is determined by the maintenance and to maintain the normal operation of the main parts, all the working parts of 3-4 months to conduct a careful inspection, and in the new flotation The first few months of work should always check;

2. for the timely replacement of wearing parts to reduce downtime, you must reserve in the warehouse are often full of wearing parts. Determined in accordance with the specific date and the use of consumable reserves.

3. in order to avoid dirt and unwanted things mixed with oil, the grease filter should be there, when the flotation machine work, the oil cap should be sealed.

4. must ensure that operators of a flotation some technical guidance or training, and strive to fully familiar with his machine.

5. drive, inspected, and before contact with the upper and lower process started.

6. after driving, and other hands touch the rotating part is strictly prohibited.

7. the driving sequence is: press the gate switch, press the start button.

8. only skilled workers can be checked.

welcome to visit Hongxing Machinery: sales@hxjq.com.

flotation plant: http://www.china-crusher-machine.com/en/products/flotation_process_flow.html