The routine maintenance of concrete mixer

Stirring effect is good or bad, not only with the concrete mixer operation an important relationship, and routine maintenance of equipment and also has a direct relationship. Concrete mixer working conditions are relatively poor as concrete mixer blender and are generally placed cantilever stirring shaft is relatively long; suffered moment and torque than the larger the bearing to withstand greater partial load, resulting in bearing wear sometimes because of a gap after the bearing seal wear, dipped into the slurry and aggravated bearing bearing. wear addition stirrer working with the relative movement of the material is large, so that the material has a strong agitator abrasive if this is uneven abrasion, the agitator will cause an imbalance sometimes because the agitator or on the tank wall adhesive material could not be cleared up Diesel Concrete Mixer, the stirring resistance increases, causing mechanical vibrations and noise. operators and maintenance personnel to conduct regular maintenance on equipment and maintenance, to improve the working conditions of pouring stirring to avoid mechanical failure.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:double horizontal shaft concrete mixer,construction equipment manufacturer,planetary concrete mixer for sale,etc. We will provide you with the best product and service.

Concrete concrete mixer should be set at a flat position concrete block making machine, with square wooden paving the front and rear axles, the tire put high overhead, avoid walking occurs when running. Concrete concrete mixer secondary leakage protection should be implemented, after returning to work before the power is turned on, must be carefully checked by a qualified empty Trial think, can be used. Commissioning tests should Drum speed is appropriate, under normal circumstances, empty speed gravity car ( after charging ) 2-3 turn slightly faster, such as a difference of more portable cement mixers, the ratio should be adjusted to move the wheel and drive wheel. When turned on, always pay attention to the operation of the various components of concrete concrete mixer is normal, check whether concrete mixer blade bent, whether it has knocked out or loose screws.